This kind of Pre-connectorized optical distribution box as the most advanced FTTX network distribution node equipment, provide quick and reliable connection, good protection and management for the FTTX network. It allows the passage of low or medium density cable and rapid distribution through its pre-connectorized output ports, which considerably saves time and operating costs.

✅ Advanced structure design, easy operation and reasonable routing.

✅ Material: PP or PC+ABS.

✅ Moisture proof, waterproof, dust-proof, anti-aging.

✅ Protection level up to IP68.

✅ 1 oval optical cable entry, 2 branch optical cable entries and 16 pre-connected adapters.

✅ 2 type splice trays optional.

✅ Installation method: pole-mounted, aerial-mounted, wall-mounted.

✅ It can be equipped with drop cable storage tray to meet the storage of 50 meters 5mm round cable.

For the environment

✅ Operating temperature: -40℃～+65℃;

✅ Relative humidity: ≤85% (+30℃);

✅ Atmospheric pressure: 70Kpa～106Kpa.

Standards comply

The following clauses quoted by this standard and become the standard clause. For dated references, subsequent amendments (excluding Corrigendum contents) or revisions do not apply to this standard, however, encourage the latest version of this specification according to the parties reach an agreement to study the possibility of using these files. The citated document without date, apply to the latest version of this specification. UL 94, Test for Flammability of Plastic Materials for Parts in Devices and Appliances YD/T 2150-2010 Optical fiber cable distribution box.

✅ Insertion loss: ≤13.8dB

✅ UPC return loss: ≥55dB

✅ APC return loss: ≥55dB

✅ Thunder-proof technical datasheet;

✅ The insulation resistance between the grounding device and the metal parts of the box is no less than; 

✅ 2x104MΩ/500V (DC) IR≥2×104 MΩ/500V;

✅ The voltage resistance between the grounding device, and the boxand its metal parts is no less than 3000V (DC)/min, no puncture, no flashover; U≥3000V.

Fiber routing diagram

How to Installation

1) Wall-mounted installation

Drill 4 holes in the wall according to the dimension, place the expansion plug Φ7.5*40, place the box to match up the holes and use screws to fasten.

2) Pole-mounted installation

Pass the hoop ring through the slot of the back plate and fix it on the telecommunication pole.

3) The overhead structure

Tie the two installed on the chassis of the overhead hung on the wire, and then bolted, prevent the case fall off.

Package

✅ 1PC in a bubble bag, 420*350mm;

✅ 1PC in a small carton, 385*260*125mm, gross weight is 3kg;

✅ 10PCS in a big corrugated carton, 540*405*655 mm, gross weight is 31kg.